Ed,
I doubt that you can be successful mitigating this emission problem with capacitors on the twisted pairs to ground. The capacitors are a low pass filter. I’m assuming your 4 twisted pairs are for 10/100/1000 BaseT. The 35MHz noise is below the 125MHz that 100/1000 BaseT operates. Any low pass filter will start attenuating the Ethernet signals before it starts to attenuate the 35MHz noise. I believe you will need to look for an alternate mitigation technique. Ken _____ From: [email protected] [mailto:[email protected]] On Behalf Of Price, Ed Sent: Tuesday, February 28, 2006 9:22 AM To: [email protected] Subject: Ethernet Decoupling I have a twisted-pair Ethernet receive and a twisted-pair Ethernet transmit set of 4 wires penetrating what would otherwise be a shielded box. Internal box noise, as low as 35 MHz, is getting out along this path. I put a 4700 pF feedthrough capacitor on each of the four lines. That worked pretty well, so well that the Ethernet shut down. Does anyone have a guideline about how much capacitance, L-L & L-G, that is typically OK? Thanks in advance! Ed Price [email protected] WB6WSN NARTE Certified EMC Engineer & Technician Electromagnetic Compatibility Lab Cubic Defense Applications San Diego, CA USA 858-505-2780 (Voice) 858-505-1583 (Fax) Military & Avionics EMC Is Our Specialty - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____ This email message and any files transmitted with it contain confidential information intended only for the person(s) to whom this email message is addressed. If you have received this email message in error, please notify the sender immediately by telephone or email and destroy the original message without making a copy. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
