Hi all I'm looking for a AC power source for EN 61000-3-2 testing. I have a used HP 6813A on hand, but from the data I have it seems that it is not for full compliance. Before buying it I would like to know if the HP is OK or not. Have some one experiences with this source and is it OK to use for compliance testing ?
and what else can be used (a cheap/used will be preferred. Best regards, Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Tlf.: 48 18 35 66 Fax: 48 18 35 30 Mobil: 22 99 69 91 E-mail: [email protected] web: www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
