Hi All, If you are into EMC, the new podcast interview I just posted will sharpen your debug techniques. If you are a circuit or equipment designer, this interview will help you avoid expensive surprises from the EMC people right at the end of the development cycle using commonly available equipment.
This podcast is a discussion of the March 2006 Technical Tidbit at http://emcesd.com titled "Predicting Cable Emissions from Common Mode Current." The paper contributed by Mat Aschenberg and Charles Grasso for this article is discussed by Mat in the interview. He talks about: * Why you may want to measure common mode currents on system cables. * How to make common mode current measurements. * The cost benefits of making this measurement. To hear this interview go to http://emcesd-podcast.com and click on the link for the March 10 program, the latest one. Doug -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Website: http://www.dsmith.org - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
