Jeff, Mi-std-461E addresses the higher levels of immunity testing and they it
can be downloaded for free at http://assist.daps.dla.mil/quicksearch/

Gary

 

  _____  

From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of jeff collins
Sent: Tuesday, April 11, 2006 10:58 AM
To: emc-p...@ieee.org
Subject: RE: Radiated Immunity Testing Beyond 61000-4-3

 

Group,

 

I need to perform Radiated Immunity testing beyond the 61000- 4-3 limits.
Section 5 of 61000-4-3 , Table 1 refers to this as the "Open Test Level" where
the field strength may be any value.

 

The question I have is: How do you calibrate and measure the field strength at
levels above the 61000-4-3 requirements?

 

I've seen emails in the past from folks making measurements at 200V/m and
higher. I'm hoping someone will chime in and enlighten me on how the
calibration and measurement was done at those levels.  Are there any Mil
-Spec's that cover how to achieve field calibration at these higher levels?

 

 

Thanks,

 

Jeff Collins

 

Compliance & Reliability

jcoll...@six9sreliable.com

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators: 

Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 

For policy questions, send mail to: 

Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 

All emc-pstc postings are archived and searchable on the web at: 

http://www.ieeecommunities.org/emc-pstc

- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 


Instructions: http://listserv.ieee.org/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org 


For policy questions, send mail to: 


Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc 


Reply via email to