Hi Grace,
 
You can visit these two website to know all the  ITU frequency allocations for
each country.
 
 
http://www.kloth.net/radio/freq-itu.php
 
http://life.itu.int/radioclub/rr/itureg.htm
 
 
I've done something like this ( Frequency Allocation Chart and some reasearch
on specific RF bands for low power RF devices ) for a company that makes
similar products as Crestron. 
 
Let me know if you need any assistance.
 
Regards,
 
Jeff Collins, Sr. Consultant, Compliance & Reliability 
Isatel USA Inc. 
2900 Gordon Avenue, Suite 100-88
Santa Clara, California 95051                                         
Office (408) 732-7690 
Cell ( 408) 386-4869
Fax 408-735-0564
 <http://us.f301.mail.yahoo.com/ym/[email protected]>
[email protected] 


Grace Lin <[email protected]> wrote:

Dear Group Members,
 
Can group members help me to prepare a chart of frequencies that accepted by
various countries?
 
Frequencies interested are 418MHz (short range devices, handheld remote
controllers), 433.92MHz (short range devices, handheld remote controllers),
and 2.4GHz (2.400-2.4835GHz) spread spectrum devices.
 
At this time, countries interested include:
 

*       Australia
*       Canada
*       EU (Austria, Belgium, Denmark, Finland, France, Germany, Greece, 
Iceland,
Ireland, Italy, Luxembourg, Norway, Portugal, Spain, Sweden, Switzerland, The
Netherlands, UK) 
*       Japan
*       New Zealand
*       US

 
Following is where I am after a couple of days Internet research.  Please
correct me if I am wrong. 
 
For 2.4GHz, all listed countries accept this frequency except France (only
accepts 2.4465-2.4835MHz) and Japan (only accepts 2.471-2.497GHz). 
 
For 433.92MHz, all listed countries accept this frequency except Greece and
Norway.
 
For 418MHz, this is a tough one.  Canada and US accept this frequency.  UK
accepts this frequency before December 31, 2007.  I probably need to purchase
a copy of AS/NZS 4268 to find out if Australia and New Zealand accept this
frequency.   For all the rest of countries, I don't know how to find the
information and look for your help.  Frequency allocation tables seem not help
too much.
 
Your help is highly appreciated.  
 
Best regards,
Grace Lin
Sr. Compliance Engineer
Crestron Electronics, Inc.
New Jersey, USA
201-750-7004 ext. 11464
 <http://www.crestron.com/> www.crestron.com
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 
To post a message to the list, send your e-mail to [email protected] 
Instructions: http://listserv.ieee.org/request/user-guide.html 
List rules: http://www.ieee-pses.org/listrules.html 
For help, send mail to the list administrators: 
Scott Douglas [email protected] Mike Cantwell [email protected] 
For policy questions, send mail to: 
Jim Bacher: [email protected] David Heald: [email protected] 
All emc-pstc postings are archived and searchable on the web at: 
http://www.ieeecommunities.org/emc-pstc 


- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to [email protected] 


Instructions: http://listserv.ieee.org/request/user-guide.html 


List rules: http://www.ieee-pses.org/listrules.html 


For help, send mail to the list administrators: 


Scott Douglas [email protected] Mike Cantwell [email protected] 


For policy questions, send mail to: 


Jim Bacher: [email protected] David Heald: [email protected] 


All emc-pstc postings are archived and searchable on the web at: 


http://www.ieeecommunities.org/emc-pstc


Reply via email to