In message <c0fd3eda.411bd%[email protected]>, dated Mon, 7 Aug 2006, Ken Javor <[email protected]> writes
> Now you could certainly idealize the transmission line for the >purposes of a standard test, and you would need to, but if you do that, >why not specify and measure the BPL current on that matched >transmission line? Would you please clarify what you mean by 'transmission line' in this context? Is it the transmission line between the BPL sender and the mains network? I ask because I am involved in a similar issue; measuring the emissions form audio-frequency induction loops fed by Class D amplifiers. At present, measuring the current in one conductor of the cable between the amplifier and the loop is believed to be the first possibility to be investigated. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immensely. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
