Hello Koh,
AS/NZS 4771 and AS/NZS 4268 are mandated by the ACMA, however for just about all spread spectrum WLAN’s, compliance with ETSI EN 300 328 means compliance with AS/NZS 4771. Your DoC must state compliance with AS/NZS 4771 however you can use 300 328 as evidence. This standard will be revoked at some point in the future and only requirements to AS/NZS 4268:2003 + A1 of 2005 will apply. Under the TTMRA, the NZ RSM allows compliance with the ACMA requirements to cover NZ without the requirement to remove the C-Tick mark or the Australian supplier code (a previous distinction between the 2 countries for RF devices), provided the Australian company is selling direct to New Zealand entities. If there is a separate NZ importer(s), then a separate DoC must be produced for NZ and the Z supplier code of the importer(s) applied. If this is confusing feel free to contact me off-line, it’s probably mind numbing for most list users. Best Regards, Martin. www.approvalspecialists.com <http://www.approvalspecialists.com/> _____ From: [email protected] [mailto:[email protected]] On Behalf Of kohscp Sent: Friday, July 28, 2006 3:28 AM To: [email protected] Subject: Product RF standard for AS/NZ Dear group, We have a RF wireless product that are tested and complies to European EN 300 328 standard. Can we declare C-Tick Declaration of Conformity (DoC) to this standard? There’s a ACA Radiocommunications (Data Transmission Equipment using Spread Spectrum Modulation Techniques) Standard 2003, at the end of the documents, it seems to say that if product complies to EN 300 328-1 is also deem meeting to this requirement. Is anyone able to confirm this? As the product which is meeting to the latest EN 300 328 standard, can it be use as proof of compliance to this ACA Radiocomm standard 2003. Or must we retest the product and generate reports to AS/NZS 4771 standard in order to generate C-Tick DoC. As for New Zealand, browsing thru the table 1 – Radio Standards, within Radiocommunication Notice 2005, No 2, can anyone advice whether this product can be classified as : Conformity Level A1, if it’s under AS/NZS 4771 std or under Spread Spectrum Device (2.4GHz) EN 300 328. Or Conformity Level 2 if under the same ACA Radiocommunications Standard 2003, as above. If it’s under Conformity Level A1, which only needs label product with Supplier Code Number (SCN), no C-Tick mark is required on product, must this SCN be from New Zealand entity? Can we use Australian entity SCN number? Looking forward to you reply. Regards Koh ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
