For Engineering Evaluation pwbs – I would say no. No certifications are required.
Best Regards Charles Grasso Compliance Engineer Echostar Communications Corp. Tel: 303-706-5467 Fax: 303-799-6222 Cell: 303-204-2974 Pager/Short Message: [email protected] <BLOCKED::mailto:[email protected]> Email: [email protected] <BLO KED::mailto:[email protected]> _____ From: [email protected] [mailto:[email protected]] On Behalf Of David Cuthbert Sent: Thursday, September 28, 2006 1:20 PM To: [email protected] Subject: certification question A question for the compliance guys: My company sells engineering evaluation PCBs with our IC’s on them. I believe that they are supplied worldwide. Some products contain or use oscillators that are above 10 kHz. And potentially some boards have voltages that exceed 42 volts. Are we required to obtain FCC and CE certification. I.E. EMC, safety, ESD, and so on? Dave Cuthbert *******************Internet e-mail Confidentiality Footer******************* This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain confidential information that is legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify me by reply e-mail, or by telephone at (719) 593-1579 and destroy the original transmission and its attachments without reading or saving in any manner. Thank you. ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
