Jim, It is not OSHA exactly. There is a Federal reg, one of the CFR series that says that. That is where it used to say UL, but was changed quite a few years ago to say NRTL. I had the reference once. I'll look and see if I can dig it up for you.
Regards, Scott Douglas [email protected] Jim Eichner wrote: > I am under the impression that there's an OSHA reg on the books > somewhere that says something along the lines of "any electrical > equipment that is to be used in the workplace must have a product safety > approval from an NRTL". > Can anyone confirm or correct me, and does anyone have a reference to > chapter and verse? I spent 20 minutes looking on OSHA's site and didn't > feel like I was going to find it. > Thanks, > Jim Eichner, P.Eng. > Compliance Engineering Manager > Xantrex Technology Inc. > e-mail: [email protected] > web: www.xantrex.com > Any opinions expressed are those of my invisible friend. > Confidentiality Notice: This email message, including any attachments, > is for the sole use of the intended recipient(s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply e-mail and destroy all > copies of the original message. > > > > > > > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > > > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
