In message <5d39f9c94199f64fa82e5809c702aa7c01d...@z-160-100-30-229.est.ibm.com>, dated Wed, 18 Apr 2007, "Gordon,Ian" <[email protected]> writes:
>Can anybody suggest a standard which describes how to perform magnetic >field emission testing from DC to at least 500Hz in addition to a guide >as to what instrumentation to use? Ideally we would like a plot of the >field against its level, similar to that from a receiver as in electric >field emission testing. In my opinion, it's very difficult to make sense of the several EN and IEC standards on this subject. You can get details of the IEC standards form the IEC web site; the relevant committee is TC106. It's more difficult to get a list of the standards produced by CLC/TC106X. You can get more information via http://www.mcluk.org/ but it will not be free. You might also try: http://www.rfi-global.com/ but I suspect they don't do measurements at audio frequencies. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk There are benefits from being irrational - just ask the square root of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
