Richard,
The acoustic noise requirements are called in GR-63 Issue 3 as
opposed to GR-1089 Issue 4. The test methods, as specified in GR-63 Issue 3,
are contained in ANSI S12.10 as well as other ANSI S12.12 and S12.54. Have
you reviewed these documents for the information you are seeking?
Thx,
Joe
Joe Finlayson
Tel: (508) 357-8273
Fax: (508) 357-8289
Email: <mailto:[email protected]> [email protected]
Motorola, Inc.
Embedded Communications Computing
46 Lizotte Drive
Marlborough, MA 01752
USA
_____
From: [email protected] [mailto:[email protected]] On Behalf Of Stone, Richard
Sent: Friday, April 13, 2007 9:04 AM
To: [email protected]
Subject: NEBS GR 1089 Issue 4
Group,
In reading this for Sound Power in DB for Acoustic Noise,
It doesn’t state the distance for the measurement device from the EUT in the
1089 document above, is it 1 meter?
Also it states different DB levels based on location with or without operator
present. Is there a consensus for location testing?
Thanks
Rich,
Richard Stone
Cantata Technology
75 Perseverance Way
Hyannis, MA 02601
Ph. 508 862 3311 Fax 508 862 3020
www.cantata.com
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc -
---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
