Hi Charles / Daniel Not sure if this applies to base stations [haven't had a chance to investigate yet] but have been told that EN 302 326-2 applies to WiMax equipment in this band.
May want to check it out as well. Regards, Mac From: [email protected] [mailto:[email protected]] On Behalf Of Charles Blackham Sent: Wednesday, March 28, 2007 9:54 AM To: Daniel Liang Cc: [email protected] Subject: Re: WIMAX base station. Daniel FCC - 47 CFR 25 and 47 CFR 90 Subpart Z - however the FCC have received a number of petitions for reconsideration of several of the requirements including that for the use of contention-based protocol for equipment to operate in this band. 2 months ago they told me that any application for equipment authorizations under 47 CFR 90 subpart Z will likely be delayed until appropriate resolution of the open petitions. R&TTE - the following harmonised standards: EMC: EN 301 489-4 RF: EN 301 753 (EN 301 021 and EN 301 126-2-1 being the applicable equipment standards) Safety: EN 60950-1 and EN 50385 regards Charlie > Dear all experts, > > Any one know about what standards apply ( or the status) for WIMAX > base station (3.5 - 3.7GHz, 802.16d or e ) measurements in FCC and EN R&TTE? > > Thanks. > > Regards, > > Daniel. > > > --------------------------------- > Do You Yahoo!? > ÑÅ»¢Ãâ·ÑGÓÊÏä£Öй� µÚÒ»¾øÎÞÀ¬»øÓʼþɧ³¬´óÓÊÏä > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
