Hi Tim, It is depending on type of telecom port. If ISN device is currently available as defined in the standard, it should be used as long as your product is functional as intended. If there is no ISN available for your specific telecom port, you may use probes as an alternative. In case of dispute, using appropriate ISN take precedence. Thanks, Ben
_____ From: [email protected] [mailto:[email protected]] Sent: Friday, May 18, 2007 11:01 AM To: Kim, Ben; [email protected] Subject: Re: EN 55022:1998+A!+A2 vs EN 55022:2006 Hi Ben, So if I'm getting my test done with the capacitive voltage probe for voltage measurement and current probe for current measurement, the telecom conducted emission requirement remains the same? My equipment will not function properly when connected to an ISN so the lab uses the current and voltage probes as specified in the standard. Thanks for your help, Tim _____ See what's free at AOL.com <http://www.aol.com?ncid=AOLAOF00020000000503> . ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
