Ghery,
I need to ask about this one. All of the CDN / ISN adapters I have used
including R&S, Fischer & Schaffner 4-Wire ISN/CDNs all have coupling networks
for 4 interfaces and are labelled for E1, Ethernet, ISDN, etc., so you are
saying the intent of CISPR 22 was to have all those interfaces tested with an
Eight Wire ISN? This is news to me, how many others on this list? Thanks.
Larry Stillings
_____
From: Pettit, Ghery [mailto:[email protected]]
Sent: Friday, May 18, 2007 3:49 PM
To: [email protected]; [email protected]; [email protected]
Subject: RE: EN 55022:1998+A!+A2 vs EN 55022:2006
CISPR 22 requires that you use an ISN based on the number of wires in the
cable, not the number actually being used. All Ethernet tests should be done
with an 8 wire ISN as Cat 3, Cat 5 and Cat 6 cables all have 8 wires.
Ghery
_____
From: [email protected] [mailto:[email protected]]
Sent: Friday, May 18, 2007 12:35 PM
To: Pettit, Ghery; [email protected]; [email protected]
Subject: Re: EN 55022:1998+A!+A2 vs EN 55022:2006
Hi Ghery,
It is a two balanced pair ISN, so of course Gigabit Ethernet will not
function, but I had trouble with 100 Mbps working through the ISN. I couldn't
get a ping through it, so the probes were used instead. Maybe a newer 8 wire
ISN will do the job.
Thanks,
Tim
_____
See what's free at AOL.com <http://www.aol.com?ncid=AOLAOF00020000000503> .
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
