From: Jim Eichner [mailto:[email protected]]
Sent: Friday, April 27, 2007 4:22 PM
To: [email protected]
Subject: EMC lab that can handle a 30kW product?
Anybody know an EMC lab that can run FCC and CE testing on a product that uses
30kW of 120Y/208Vac, 3ph, 60Hz power? Line currents are around 83Arms, so
four 100A LISN's and a big 120Y/208 feed would be needed.
Thanks,
Jim Eichner, P.Eng.
Compliance Engineering Manager
Xantrex Technology Inc.
e-mail: [email protected]
web: www.xantrex.com
I could help you only up to 30 Amps per phase.
BTW, better remind any bidders to double-check their air conditioning
capability too. Long ago, I have had 100 kW EUT's where it's a race to acquire
data before they shut down from over-temp!
Ed Price
<mailto:[email protected]> [email protected] WB6WSN
NARTE Certified EMC Engineer & Technician
Electromagnetic Compatibility Lab
Cubic Defense Applications
San Diego, CA USA
858-505-2780 (Voice)
858-505-1583 (FAX)
Military & Avionics EMC Is Our Specialty
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected] Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected] David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
