Thanks for all the responses everyone. I should have been a bit more specific. Our preference is for something in California, and yes we need a lab that is accredited, for testing an unintentional radiator for FCC, Industry Canada, and EMC Directive work.
Thanks again, Jim Eichner, P.Eng. Manager - Compliance Engineering and SW Test Xantrex Technology Inc. e-mail: [email protected] web: www.xantrex.com Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. From: Derek Walton [mailto:[email protected]] Sent: Friday, April 27, 2007 4:43 PM To: Jim Eichner Cc: [email protected] Subject: Re: EMC lab that can handle a 30kW product? HI Jim, do you need an accredited lab? We have a 60 kVA source that we use to supply our room. Thats at 60 Hz, at 50 Hz it drops to 45 kVA. Cheers, -- Derek N. Walton Owner L F Research www.lfresearch.com Phone: (815) 566 5655 Jim Eichner wrote on 4/27/2007, 6:22 PM: > Anybody know an EMC lab that can run FCC and CE testing on a product > that uses 30kW of 120Y/208Vac, 3ph, 60Hz power? Line currents are > around 83Arms, so four 100A LISN's and a big 120Y/208 feed would be > needed. > > Thanks, > > Jim Eichner, P.Eng. > Compliance Engineering Manager > Xantrex Technology Inc. > e-mail: [email protected] > web: www.xantrex.com > Any opinions expressed are those of my invisible friend. > Confidentiality Notice: This email message, including any attachments, > is for the sole use of the intended recipient(s) and may contain > confidential and privileged information. Any unauthorized review, use, > disclosure or distribution is prohibited. If you are not the intended > recipient, please contact the sender by reply e-mail and destroy all > copies of the original message. > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to [email protected] > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas [email protected] > Mike Cantwell [email protected] > > For policy questions, send mail to: > > Jim Bacher: [email protected] > David Heald: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
