I have read some published lit from a member of TC108, whom said that as 62368 was a "Hazard Based Standard", that is would not, in fact, replace 60950-1 and 60065 because it was a 'new' std. HUH???
So will this std be considered a normative ref for IT and A/V safety, or will it eventually replace these stds ? Thanks much, Brian > -----Original Message----- > From: [email protected] [mailto:[email protected]]On Behalf Of John > Woodgate > Sent: Friday, April 27, 2007 10:57 AM > To: [email protected] > Subject: Re: EN 60950-1:2006 Cl.1.5.9.2 > This subject is a frequent source of doubt and uncertainty, > and if IEC > TC108 wasn't bogged down with the huge problems of the new multimedia > standard IEC 62368, it would be good to undertake a thorough > review of > the provisions in this area. > -- > OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk > There are benefits from being irrational - just ask the > square root of 2. > John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
