In message <004801c788c5$1df37da0$154d4d0a@MmPc21>, dated Fri, 27 Apr 2007, Piotr Galka <[email protected]> writes:
>If EN 60950-1 needs me to use here (or anywhere else) an adequate >interrupting device, and I decide to use fuse, can it be any fuse which >in my opinion is good, or I have to check the fuse manufacturer for >some agency reports that the fuse comply with any particular component >standard, and what standard ? >May be it is the question everyone knows the answer, but I don't. Your fuse need to comply with the relevant part of IEC 60127, and be of adequate breaking capacity. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk There are benefits from being irrational - just ask the square root of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
