Brian,
Somewhere in the rules are the fines associated for mislabeling a
product with the incorrect FCC identifier (I think in Part 2 of CFR 47).
Since you can't get one for this type of device, I would refer your customer
to that :-).
Larry
From: Brian O'Connell [mailto:[email protected]]
Sent: Tuesday, April 24, 2007 11:31 AM
To: [email protected]
Subject: FCC IC mark requirements
A customer wants an FCC 'ID' mark on a linear wall wart that is intended to
recharge a power tool. As the unintentional radiator (Pt 15, subpt B, sec
15.101) indicates that "All other devices" require a mfr's 'Verification',
the FCC ID requirement would not apply. Also as the exempted devices in sec
15.103 only apply to a digital device, I cannot use the appliance exemption.
Other than the emissions limits, is anyone aware of special FCC marking
requirements for import into the U.S. of wall-wart power supplies that will
not connect to an IT or ISM device ?
If the customer always correct, am I always wrong ?
thanks and luck,
Brian
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
