Dear John Thanks for your answer.
Concerning electrical safety: EN 61010-1 is also used for control, lab and measurement equipment, not only for invitro diagnostic medical devices. EN 60335-1 excludes appliances intended exclusively for industrial purposes (see scope) Concerning EMC: EN 61326 is normally applicable when EN 61010-1 is used unless there are better specific product related standards. EN 55014 is mostly for household equipment, but is it also used for industrial equipment ? So I still confused. Best regards, Kim Boll Fra: [email protected] [mailto:[email protected]]Pa vegne af John Woodgate Sendt: 13. juni 2007 01:11 Til: [email protected] Emne: Re: Shipping containers In message <[email protected]>, dated Tue, 12 Jun 2007, Kim Boll Jensen <[email protected]> writes: >I was thinking of using EN 60204 and EN 61010-1 for electrical safety It's not a medical device! EN 60335-1 with any applicable section of EM 60335-2 would be appropriate. >and EN 61326 for EMC (industrial locations). No, that's for test equipment! EN 55014-1 and -2 would apply, but you might well need other standards for shipboard use, despite what you have been told. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk There are benefits from being irrational - just ask the square root of 2. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
