Wendy, here's some suggestions IEC 61000-4-5 Surge: The product standard should define the current limiting resistor, but in any case a coupling through a capacitor is your choice. If no other instructions, use the mains coupler you have.
61000-4-4 fast transients: simply use the mains coupler or capacitive clamp 61000-4-6 RF imm: power line CDN. This seems simple, did I miss some specific problem you have? Regards Ari Honkala >-----Original Message----- >From: [email protected] [mailto:[email protected]] On Behalf >Of ext John Woodgate >Sent: 5. lokakuuta 2007 10:25 >To: wendy >Cc: [email protected] >Subject: Re: Injection on DC Output port > >In message <001801c806ed$0bdb5b00$9e0a0a0a@LAB172486D6880>, wendy ><[email protected]> writes >>I have a simple product with only one AC input port and one dc output >>port. According to its product standard, the dc output port must be >>subjected to Conducted Immunity, Fast Transients and Surge tests. I >>would like to know how to test dc output ports for the tests >in question. > > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Notice: This e-mail is intended solely for use of the individual or entity to which it is addressed and may contain information that is proprietary, privileged, company confidential and/or exempt from disclosure under applicable law. If the reader is not the intended recipient or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If this communication has been transmitted from a U.S. location it may also contain data subject to the International Traffic in Arms Regulations or U.S. Export Administration Regulations and cannot be disseminated, distributed or copied to foreign nationals, residing in the U.S. or abroad, without the prior approval of the U.S. Department of State or appropriate export licensing authority. If you have received this communication in error, please notify the sender by reply e-mail or collect telephone call and de! lete or destroy all copies of this e-mail message, any physical copies made of this e-mail message and/or any file attachment(s). - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This e-mail has been scanned by MCI Managed Email Content Service, using Skeptic(tm) technology powered by MessageLabs. For more information on MCI's Managed Email Content Service, visit http://www.mci.com. ______________________________________________________________________
