Wendy, > According to its product standard, the dc output port must be subjected to Conducted Immunity, Fast Transients and Surge tests. I would like to know how to test dc output ports for the tests in question.
Ari gave you some suggestions on how to test the subject ports according to IEC61000-4-4/5/6, but required test levels you should find in your product standard. BTW: CISPR22/EN55022 is just for emissions and for of ITE only. Regards, John Radomski - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This e-mail has been scanned by MCI Managed Email Content Service, using Skeptic(tm) technology powered by MessageLabs. For more information on MCI's Managed Email Content Service, visit http://www.mci.com. ______________________________________________________________________
