In message <[email protected]>, dated Wed, 19 Dec 2007, PAUL STOVER <[email protected]> writes:
>We've an HP8542E Receiver with an HP 85420E RF Filter section. The rear >of the Receiver has R - G(sync) - B display video out bnc connectors >and an aux video bnc. We have been completely unsuccessful in finding a >way to get this to an external monitor. > >Anyone have a solution? Well, have you got an ancient monitor that will accept RGB with synch-on-green? If not, you may be able to use a monitor with RGB + Synch, by connecting Green and Synch together. You probably can't use a monitor with separate horizontal and vertical synch inputs. You may need to look at the output signals with a scope, to see if they are positive-going or negative-going. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk For very important information, please turn over. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
