Dan, See below "Anchondo, Dan" <[email protected]> wrote:
All Does anyone know what the EMC requirements are for Mexico? Peter: No requirements for emc at this time Do I need an in-country representative for a NOM mark? Peter: Yes, you do. However, there are legal agents in Mexico who can be considered legal licenseholders and charge a fee The product is a SRD 13.56 MHz TX wireless card reader UL/IEC 60950 type product that runs from a 9Vdc 1000mA wall-wart power supply. Peter: Wall-wart power supply needs NOM Mark to NOM-001 or the combination can be tested to NOM-019. The wireless needs a separate Cofetel cert. My understanding of electrical safety for Mexico is: 1. You need to test in-country (Mexico). Peter: No you can test in labs like TUV Rheinland which have MOU with in-country laboratory. 2. All electrical equipment entering Mexico needs to be tested. Peter: No, only regulated equipment 3. Mexico uses IEC60950 for its safety and the current Mexico National Electrical Code may be harmonized with the NEC (USA). Peter: Mexico does not recognized IEC60950. They have their own NOM-019 standard which is very similar to the old UL478. Should you have any questions, you can write me at [email protected] Please inform or correct me if I’m wrong. Regards Dan Anchondo - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access <http://us.rd.yahoo.com/evt=4752 /*http://tc.deals.yahoo.com/tc/blockbuster/text5.com> , No Cost. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
