Hi All, I am a little late this month on my Technical Tidbit because of intensive travel. But I am almost caught up now.
The Technical Tidbits are written to be able to be read in a few minutes and stimulate thought. I am interested if anyone on the list has tried a test like the one below and what the results were and if any problems avoided. This month's Technical Titbit: <http://emcesd.com/tt2008/tt040508.htm> Technical Tidbit - April 2008 Measuring Structural Resonances - Part 2, Printed Wiring Board Traces (A Simple Technique for Determining the Resonant Frequencies of a PWB Trace) Abstract: Using a shielded magnetic loop to measure the resonant frequencies of printed wiring board (PWB) traces can be a useful tool in scanning a PWB for potential problems as part of an overall evaluation of a board. A method of doing this along with an example are given. The link to the most recent Technical Tidbit (this one at the moment) is always the picture at the bottom of my main page at http://emcesd.com Doug -- ___ _ Doug Smith \ / ) P.O. Box 1457 ========= Los Gatos, CA 95031-1457 _ / \ / \ _ TEL/FAX: 408-356-4186/358-3799 / /\ \ ] / /\ \ Mobile: 408-858-4528 | q-----( ) | o | Email: [email protected] \ _ / ] \ _ / Web: http://www.dsmith.org - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
