And anyone not having a field probe present during test should need a personal sanity check.
How would you make sure you really have a field and not a broken antenna or something else. As per 17025 you need to make sure that you know what you are doing. Petter From: Bryce Stammerjohan [mailto:[email protected]] Sent: den 27 september 2011 22:19 To: [email protected] Subject: Re: [PSES] BS EN61000-4-3 and calibrated fields. I asked this just a few days ago when at a lab – this particular tech said it was a “sanity check”. The displayed 3-axis RMS value was close to the V/m setting I requested, but did vary with frequency and polarity, unsurprisingly. Bryce From: Kunde, Brian [mailto:[email protected]] Sent: Tuesday, September 27, 2011 1:19 PM To: [email protected] Subject: Re: [PSES] BS EN61000-4-3 and calibrated fields. Not to hijack this thread, but why do some test labs setup the Field Probe in the chamber next to the EUT during the test? The measurement with the EUT in the field should be all over the place and would have little value. Am I missing something or are some labs leveling off the Field Probe during testing? From: [email protected] [mailto:[email protected]] On Behalf Of Ian White (UK) Sent: Tuesday, September 27, 2011 6:00 AM To: IEEE Forum ([email protected]) Subject: BS EN61000-4-3 and calibrated fields. Could you please help: Could you explain what is the correct procedure when using an anechoic chamber which is calibrated and operating to EN61000-4-3. During calibration of the chamber, a calibration file is made and it is assessed according to the guidelines laid down under BS EN61000-4-3. During calibration the chamber is empty. During a normal test run a UUT is put into the chamber. The questions is : a) Do you use the calibration file as the starting point and adjust the field strength which may have changed due to the UUT being in the chamber. b) Just take the calibration file and run it and except the filed strengths would have changed due to the UUT being in the chamber. Thanks Ian White Compliance and Reliability. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ http://product-compliance.oc.ieee.org/> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> ________________________________ LECO Corporation Notice: This communication may contain confidential information intended for the named recipient(s) only. If you received this by mistake, please destroy it and notify us of the error. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ http://product-compliance.oc.ieee.org/> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ http://product-compliance.oc.ieee.org/> Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
