Ken,
 
We have been replacing our older emissions cables with those from Microcoax.
www.microcoax.com. Expensive, but really good cable.
 
We have a couple of cables for testing up to 26.5 GHz, which is the MKR300C
ruggedized cable. We also have one cable for up to 40 GHz, MKR240A. And we
just ordered a 15m cable (to antenna mast) for up to 18GHz, UFB293C with
optional armor and precision N connectors. That last cable is over $2400.
Whatever cables you get from Microcoax, get the "test" cables and not the
"hookup" cables. The "test" cables are rated much higher for flexure, the
"hookup" is made more for a cable that will be installed and not moved around
afterwards.
 
Bob R.


--- On Tue, 7/19/11, Ken MacGrath <[email protected]> wrote:



        From: Ken MacGrath <[email protected]>
        Subject: Low loss cables
        To: [email protected]
        Date: Tuesday, July 19, 2011, 9:04 PM
        
        
        
        Hello All,
         
        I'd appreciate any/all cables recommendations for a rugged low loss 
cable for
radiated emissions testing at 10 meters, and cables for radiated immunity
(61000-4-3).  
        
        Thanks in advance! 
        
        
        Ken 
        -
        ----------------------------------------------------------------
        This message is from the IEEE Product Safety Engineering Society 
emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
        
        All emc-pstc postings are archived and searchable on the web at
http://product-compliance.oc.ieee.org/
        Graphics (in well-used formats), large files, etc. can be posted to 
that URL. 
        Website: http://www.ieee-pses.org/
        Instructions: http://listserv.ieee.org/request/user-guide.html
        List rules: http://www.ieee-pses.org/listrules.html 
        For help, send mail to the list administrators:
        Scott Douglas <[email protected]>
        Mike Cantwell <[email protected]> 
        For policy questions, send mail to:
        Jim Bacher <[email protected]>
        David Heald <[email protected]> 

-
----------------------------------------------------------------
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://product-compliance.oc.ieee.org/
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to