Hi all, Many more on HB in:
http://books.google.be/books?id=5LLu7IV IScC&pg=PA514&lpg=PA514&dq=UL94+HB+75&s urce=bl&ots=WF3Udo0Dhw&sig=XN45xoxekphh f-T3tKNUMgcNYI&hl=nl&ei=oPwqTPaKNZaXONn 5LID&sa=X&oi=book_result&ct=result&resn m=8&ved=0CD8Q6AEwBw#v=onepage&q=UL94%20HB%2075&f=false Best regards, Kris Carpentier -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Brian O'Connell Sent: donderdag 9 december 2010 20:07 To: [email protected] Subject: RE: Plastic flamibility rating Found in IEC60695-11-10. The suffix can be considered a 'clarification' of HB. Specifies the burning rate (mm per min) over a set length of material. 'Correlation' is based on specific material dimensions, so not necessarily equivalent. Requirements for HB40 and HB75 only if external. Brian -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Doug Kramer Sent: Thursday, December 09, 2010 10:30 AM To: [email protected] Subject: Plastic flamibility rating What is the difference between 94HB, HB40 and HB75? Yes I know the 94HB rating is based on a flame test over a glowing wire test. Is there any correlation between the 2 rating systems? Is HB40 considered equivalent to 94HB? Thanks, Doug Kramer - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
