Hello, IMO it is not acceptable to use a standard SMA connector (even with glue!) as the FCC will not regard it as a unique connector. I suggest using the left thread SMA it is ubiquitous and available everywhere. I suggest you check with your friendly TCB for a ruling.
Chas ________________________________________ From: [email protected] [[email protected]] On Behalf Of Bill Owsley [[email protected]] Sent: Friday, September 10, 2010 10:08 PM To: [email protected]; [email protected] Subject: Re: How to meet requirement for 'fixed' wireless antenna glue works! Just so the end user can't change to something else. (without being technically talented) Bill In the event of a national emergency, click on the following links to provide directions to your duly elected mis-representatives. http://www.usa.gov/Contact/Elected.shtml or... https://writerep.house.gov/writerep/welcome.shtml http://www.senate.gov/general/contact_information/senators_cfm.cfm if really desperate... http://www.usa.gov/Contact/Elected.shtml --- On Fri, 9/10/10, [email protected] <[email protected]> wrote: From: [email protected] <[email protected]> Subject: How to meet requirement for 'fixed' wireless antenna To: [email protected] List-Post: [email protected] Date: Friday, September 10, 2010, 9:51 PM It is my understanding that for wireless 2.45GHz [zigbee] compliance, the antenna has to be 'permanently' attached during Production. Or, use left-handed SMA connector. What? Does it take a license to buy a left handed SMA connector now? Anyway, is it acceptible to use a regular SMA connector and then loctite it down, or RTV it down, or such? Or, place a "warrantee void if seal broken" label on it? Recommendations out there? Regards, Robert - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]</mc/[email protected]>> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]</mc/[email protected]>> Mike Cantwell <[email protected]</mc/[email protected]>> For policy questions, send mail to: Jim Bacher: <[email protected]</mc/[email protected]>> David Heald: <[email protected]</mc/[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]<mailto:[email protected]>> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]<mailto:[email protected]>> Mike Cantwell <[email protected]<mailto:[email protected]>> For policy questions, send mail to: Jim Bacher <[email protected]<mailto:[email protected]>> David Heald <[email protected]<mailto:[email protected]>> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
