OK checked through the two documents I have and they’re both related to Telecom, not ITE, sorry if that scared anyone! One 20000is only a draft so I would have to dig around to see if it’s now mandatory.
ELECTROMAGNETIC COMPATIBLITY STANDARD FOR TELECOMMUNICATION EQUIPMENT NO SD/EMI-02/03.MAY.2006 GENERIC REQUIREMENTS OF PABX No. TEC/GR/SW/PBX-CPA/01 DRAFT.2008 Rich From: Bill Owsley [mailto:[email protected]] Sent: Friday, September 10, 2010 12:15 PM To: Derek Walton; [email protected]; Jones, Richard (Richard) Subject: RE: [PSES] Radiated Immunity Frequency Range And the reference document for that would be...?? Bill --- On Fri, 9/10/10, Jones, Richard (Richard) <[email protected]> wrote: From: Jones, Richard (Richard) <[email protected]> Subject: RE: [PSES] Radiated Immunity Frequency Range To: "Derek Walton" <[email protected]>, "[email protected]" <[email protected]> List-Post: [email protected] Date: Friday, September 10, 2010, 10:54 AM India has a requirement for 10V/m up to 6GHz for ITE products. Rich From: Derek Walton [mailto:[email protected]] Sent: Thursday, September 02, 2010 2:56 PM To: [email protected] Subject: Re: [PSES] Radiated Immunity Frequency Range HI Grace, EN61000-4-3 is being referenced by others too. We completed a 200 v/m version of EN61000-4-3 from 1 GHz to 18 GHz for the US Coast Guard. Sincerely, Derek Walton L F Research On 9/2/2010 1:36 PM, Mark Gandler wrote: Grace, there are some service providers specs, for example Comcast, which requires RI up to 6Ghz. Mark > Date: Thu, 2 Sep 2010 07:27:10 -0400 > Subject: Radiated Immunity Frequency Range > From: [email protected] > To: [email protected] > > Dear Members, > > Is there any product standard(s) requiring frequency above 1GHz for > radiated immunity test? The latest 61000-4-3 basic standard does > mention test frequency above 1GHz (up to 6GHz). > > Thank you and look forward to hearing from you. > > Best regards, > Grace > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
