Scott We have been testing radiated emission above 1 GHz for EN 55022: 2006/A1:2007 for a few years. ITL is accredited by A2LA. Regards,
David Shidlowsky | Technical Writer Address 1 Bat-Sheva St. POB 87, LOD 71100 Israel Tel 972-8-9186113 Fax 972-8-9153101 Mail [email protected]/[email protected] Web www.itl.co.il Fill out Customer Satisfaction Survey Global Certifications You Can Trust -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Scott Xe Sent: Tuesday, November 22, 2011 6:44 PM To: Bill Stumpf; [email protected] Subject: Re: EN 55022 for iTE Bill, Thanks for your advice. I believe it is a new requirement and afraid no accredited labs doing this test. It sounds the big labs should be equipped with the necessary facilities since the standard becomes in force already. Thanks to all replies! Regards, Scott On 22/11/2011 12:34 AM, "Bill Stumpf" <[email protected]> wrote: > Scott, > Testing to 6GHz became mandatory on October 1, 2011. You can comply > with > EN55022:2006 / A1:2007, or EN55022:2010. Testing above 1GHz is > conditional based on the clock /timing signals of the device being tested. > > I would hope that labs are equipped and educated to test above 1GHz > since it has been an FCC requirement for years. Test sites (OATS of > chambers) must also meet CISPR 16 requirements for Site VSWR above 1GHz. > > Bill > > > > Bill Stumpf > D.L.S. Electronic Systems, Inc. > 166 South Carter Street > Genoa City WI 53128 > Ph: 262-279-0210 > Email: [email protected] > > > > -----Original Message----- > From: Scott Xe [mailto:[email protected]] > Sent: Saturday, November 19, 2011 10:30 PM > To: [email protected] > Subject: [PSES] EN 55022 for iTE > > Dear All, > > I have learnt that the latest version requires to test the products > upto 6 GHz from 1 GHz. When will it commence on which amendment? Have > most of public labs well equipped to conduct the test to the new requirements? > > Thanks and regards, > > Scott > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. To post a message to the list, send your > e-mail to <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://product-compliance.oc.ieee.org/ > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> Mike Cantwell > <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
