Dear Members, Is there any test standard indicating the location of 1-meter by 1.5-meter table in the (2-meter) turntable? Legend 6) of Figure 11a of ANSI C63.4: 2003 states: "Rear of EUT, including peripherals, shall all be aligned and flush with rear of tabletop". I assume this legend applies to all tabletop equipment, including non-computer devices. Our engineers align the EUT flush with rear of tabletop. However, some engineers feel the EUT should be in the center of the 2m turntable and they move the 1mx1.5m table for the EUT to be in the center of the 2m turntable. Some engineers leave the 1mx1.5m table in the center of the 2m turntable. Due to each engineer's preference, the 1mx1.5m table is moved frequently. Some engineers took data in different table location and confused by the data taken. The complaint arises and brings to the managers' attention. Thank you and look forward to your input. Best regards, Grace - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
