It never occurred to me that someone might make a special gadget for this job - I just use our workshop oxy-acetylene torch!
Nick. At 15:04 -0400 18/7/08, Bolintineanu, Constantin wrote: >Dear Colleagues, > >I would like to kindly ask you in regard to the THERMOCOUPLES WELDERS >that you are using. >Information regarding the suppliers, and best performances and >reliability, with not to many headaches are very much appreciated. I >must admit that what we found is not an approved type... >I would prefer to understand which is the best solution without using >too many consumables. > >Please accept in advance my many thanks for your replies. > >Respectfully yours, >Constantin > >Constantin Bolintineanu P.Eng. >TYCO SAFETY PRODUCTS CANADA >3301 LANGSTAFF Road, L4K 4L2 >CONCORD, ONTARIO, CANADA >e-mail: [email protected] >Tel: 905 760 3000 ext 2568 >Fax: 905 760 3020 > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
