Ken, I just went through this choosing process and would like to share my experience. My former employer uses TILE. It was excellent as Mike set up everthing for a customer to start with. Due to the transfer of the ownership, It was not on the market early this year. Last May, a technician from ETS-Lindgren tells me that TILE is back to the market. Teseq is a good software. It takes some time to learn how to use it. I was too busy to spend time on it. Teseq had to come back to write programs for our applications. A member of this group was one of the author for that software. It seems this software has a different versions (basic and advance). Find out the details from the sales to avoid future dispute. Members suggested me to have LabView as a backup software. I thank you them for this comment. We had to gather some data during design stage. It is not easy to do so by using most of EMI software package. It took my colleague less than one hour to write one by using LabView. I hope this helps. Regards, Grace
On 7/21/08, Ken Javor <[email protected]> wrote: Forum Members, I am assisting in choosing automated software control for an EMI test facility. I'm old school – REAL old school – and am unfamiliar with any of the following: ETS Lindgren – TILE http://www.ets-lindgren.com/page/?i=Tile Teseq – Compliance 3 http://www.tese .com/com/en/products_solutions/emc_radio_frequency/software/index.php?navid=37 CKC – EMI Test http://www.ckc.com/emitest.asp If any of you have experience with any of these, or others, positive or negative, please let me know off-line. Thank you, Ken Javor Phone: (256) 650-5261 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
