Option B? I thought I was the only one left with a cassette player in my car. :-)
Not sure why anyone would bother with satellite radio, I find terrestrial AM and FM broadcasts still have decent variety. Ralph McDiarmid, AScT Compliance Engineering Group Xantrex Technology Inc. From: [email protected] [mailto:[email protected]] On Behalf Of Conway, Patrick R (Houston) Sent: Wednesday, August 13, 2008 9:23 AM To: [email protected] Subject: RE: FM Modulator Information A family member forwarded the below email. (I'm pleasantly surprised that they remember my field of work !) Does anyone on this list subscribe to XM? It would be interesting to know the details of the interference problem. Best Regards, Patrick Conway, NCE. Hewlett-Packard Co. [email protected] 281.514.2259 281-514.5473(fax) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~ From: XM Radio [mailto:[email protected]] Sent: Wednesday, August 13, 2008 9:11 AM To: Subject: FM Modulator Information Dear XM Subscriber, The FCC has notified XM that some of our older receiver models (generally, those purchased before August, 2006) may not operate in the manner required by the FCC and may cause interference to nearby FM radio users depending on how the XM radio is installed or used. The receiver models include the Roady2(r), SKYFi2(r), MyFi(r), Airware(r), Tao, RoadyXT(r), Xpress(tm), Sportscaster, XR9-XCX9, Jensen JXR9, inno(r), Helix(tm), and Nexus(r). Please note this notice does not apply to you if your new car came installed with an XM receiver. If you do have one or more of the receivers mentioned above and use it with the wireless FM option or you have had the receiver professionally installed, then we have several options available at no cost to you to alleviate this possible interference. Please visit our website at www.xmradio.com/fmmodinfo <http://email.xmradio.com/a/hBIoukKB7RzePB7SVYU$Ka5GK0m/xm4> or call us toll-free at 866-410-0096 to choose one of the following three options: Option A: We will send you ferrite beads to attach to your XM antenna and power adaptor cables. (Ferrite beads are typically placed on the end of data cables to reduce interference.) Option B: We will send you a replacement cassette adapter to use with your XM radio. Only choose this option if your car radio has a cassette player. Option C: If your car does not have a cassette player, we will provide you with ferrite beads and an installation kit, with hardware, to use in connection with a professional installation of your radio along with a coupon redeemable at no charge for professional installation. Please visit the following website, www.xmradio.com/fmmodinfo <http://email.xmradio.com/a/hBIoukKB7RzePB7SVYU$Ka5GK0m/xm4> for more information and to select your option. If you do not have access to the Internet, you may call 866-410-0096 for information on how to alleviate this possible interference. To help expedite your order, please have your 8-digit Radio ID (found on Channel 0 of your XM radio) and your FCC ID (found on the back, the bottom, or under the battery of your XM radio), available when you start this process. Thank you for your attention to this matter. Best Regards, XM Management Note - If you are using your XM radio's FM modulator to send the XM signal to a home or car stereo, your radio will work best if you use an unused FM frequency. Go to www.radio-locator.com/cgi-bin/vacant <http://email.xmradio.com/a/hBIoukKB7RzePB7SVYU$Ka5GK0m/xm5> to find the best FM frequencies to use in your area. Please do not reply to this email. This is a service email from XM Satellite Radio. Please note that you may receive service email in accordance with your XM Satellite Radio Customer Agreement, whether or not you elect to receive promotional email. XM Satellite Radio Inc., 1500 Eckington Place NE, Washington, D.C. 20002. Copyright 2008 XM Satellite Radio. All rights reserved. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
