In message <[email protected]>, dated Wed, 20 Aug 2008, [email protected] writes:
>How and what do United States labs typically do (use) to power EUTs >that run at 110V 60 HZ and at 220V 50Hz. Electronic converters, and motor-alternator sets for the highest powers. >Also are there other power voltage/frequency combinations I should be >considering besides those two mentioned. The European voltage is 230 V, not 220 V. Other 50 Hz countries use 220 V and 240 V. Japan has 100 V 50 Hz and 60 Hz (but not simultaneously). The US voltage is 120 V 60 Hz. There is a vast amount of information at: http://users.telenet.be/worldstandards/electricity.htm -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Either we are causing global warming, in which case we may be able to stop it, or natural variation is causing it, and we probably can't stop it. You choose! John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
