Thanks Ron.  Earlier today I spent some time at www.pta.gov.pk
<http://www.pta.gov.pk/> , but I was unable to find information on the actual
technical requirements that typically apply to telecom and/or ITE products. 
For example, I would like to know if there are any EMC immunity requirements,
and if so, what those requirements are.  

Based on your suggestion, I went back to the site and poked around a little
more.  In the list of government sites there is a link listed for the "IT and
Telecom Division" that sounds promising, but at present that link is dead.

I will check the link again periodically to see if it comes back online, but
in the meantime I remain interested in any assistance that you or others in
this group could provide.



Joe Randolph
Telecom Design Consultant
Randolph Telecom, Inc.
781-721-2848 (USA)
[email protected]
http://www.randolph-telecom.com <http://www.randolph-telecom.com/> 







        Hi Joe,
         
        You should be able to find what youre looking for on/from the PAKISTAN
TELECOMMUNICATION AUTHORITY at www.pta.gov.pk <http://www.pta.gov.pk/> . With
the short list of equipment needing to be type approved there, you might not
need to go through it, but youll need to consult with the PTA get any updated
info. Please note that that market was recently deregulated, but licenses
might still be quite expensive. However, you may know this already.
         
        Im not sure I answered your question, but IHTH.
         
        
        Best regards,
        
         
        
        Ron Pickard
        
        RPQ Consulting
        
        Glendale, AZ 85303
        
        +623.512-3451 tel, +623.848-9033 fax
        
        [email protected]
        
        www.rpqconsulting.com <http://www.rpqconsulting.com/> 
        
________________________________

        From: [email protected] [mailto:[email protected]] On Behalf Of Joe 
Randolph
        Sent: Tuesday, September 23, 2008 2:38 PM
        To: [email protected]
        Subject: Pakistan requirements for telecom TTE?
         
        Hello All:
        
        I'm trying to determine what requirements Pakistan has for telecom 
terminal
equipment for safety, EMC, and telecom.  So far I have not been able to come
up with much.  Any insight would be much appreciated.
        
        
        
        Joe Randolph
        Telecom Design Consultant
        Randolph Telecom, Inc.
        781-721-2848 (USA)
        [email protected]
        http://www.randolph-telecom.com <http://www.randolph-telecom.com/> 
        - ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 
        
        To post a message to the list, send your e-mail to [email protected] 
        
        Instructions: http://listserv.ieee.org/request/user-guide.html 
        
        List rules: http://www.ieee-pses.org/listrules.html 
        
        For help, send mail to the list administrators: 
        
        Scott Douglas [email protected] Mike Cantwell [email protected] 
        
        For policy questions, send mail to: 
        
        Jim Bacher: [email protected] David Heald: [email protected] 
        
        All emc-pstc postings are archived and searchable on the web at: 
        
        http://www.ieeecommunities.org/emc-pstc -
---------------------------------------------------------------- This message
is from the IEEE Product Safety Engineering Society emc-pstc discussion list.
Website: http://www.ieee-pses.org/ 
        
        To post a message to the list, send your e-mail to [email protected] 
        
        Instructions: http://listserv.ieee.org/request/user-guide.html 
        
        List rules: http://www.ieee-pses.org/listrules.html 
        
        For help, send mail to the list administrators: 
        
        Scott Douglas [email protected] Mike Cantwell [email protected] 
        
        For policy questions, send mail to: 
        
        Jim Bacher: [email protected] David Heald: [email protected] 
        
        All emc-pstc postings are archived and searchable on the web at: 
        
        http://www.ieeecommunities.org/emc-pstc 

- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to [email protected] 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators: 

Scott Douglas [email protected] Mike Cantwell [email protected] 

For policy questions, send mail to: 

Jim Bacher: [email protected] David Heald: [email protected] 

All emc-pstc postings are archived and searchable on the web at: 

http://www.ieeecommunities.org/emc-pstc 

Reply via email to