Sometimes it is easier to pick up the phone and speak to the Regulation Engineer and ask your questions directly or send him a fax. The all speak English. phone 92-51-2878138 or fax 92-51-2878139. You may need to call multiple times to get him Do not call on a Friday as it is a holiday like our Sunday. officers/engineers come to work about 9-10am so keep in mind the time PST+12 hour difference when calling Pakistan. calls to Pakistan are inexpensive about $0.14 a minute if you have a calling plan. good luck. Christopher
--- On Tue, 9/23/08, Joe Randolph <[email protected]> wrote: From: Joe Randolph <[email protected]> Subject: RE: Pakistan requirements for telecom TTE? To: [email protected] Cc: [email protected] Date: Tuesday, September 23, 2008, 8:33 PM Thanks Ron. Earlier today I spent some time at www.pta.gov.pk <http://www.pta.gov.pk/> , but I was unable to find information on the actual technical requirements that typically apply to telecom and/or ITE products. For example, I would like to know if there are any EMC immunity requirements, and if so, what those requirements are. Based on your suggestion, I went back to the site and poked around a little more. In the list of government sites there is a link listed for the "IT and Telecom Division" that sounds promising, but at present that link is dead. I will check the link again periodically to see if it comes back online, but in the meantime I remain interested in any assistance that you or others in this group could provide. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 <skype:+17817212848?origin=IETB> (USA) [email protected] http://www.randolph-telecom.com <http://www.randolph-telecom.com/> Hi Joe, You should be able to find what you池e looking for on/from the PAKISTAN TELECOMMUNICATION AUTHORITY at www.pta.gov.pk <http://www.pta.gov.pk/> . With the short list of equipment needing to be type approved there, you might not need to go through it, but you値l need to consult with the PTA get any updated info. Please note that that market was recently deregulated, but licenses might still be quite expensive. However, you may know this already. I知 not sure I answered your question, but IHTH. Best regards, Ron Pickard RPQ Consulting Glendale, AZ 85303 +623.512-3451 <skype:+6235123451?origin=IETB> tel, +623.848-9033 <skype:+6238489033?origin=IETB> fax [email protected] www.rpqconsulting.com <http://www.rpqconsulting.com/> ________________________________ From: [email protected] [mailto:[email protected]] On Behalf Of Joe Randolph Sent: Tuesday, September 23, 2008 2:38 PM To: [email protected] Subject: Pakistan requirements for telecom TTE? Hello All: I'm trying to determine what requirements Pakistan has for telecom terminal equipment for safety, EMC, and telecom. So far I have not been able to come up with much. Any insight would be much appreciated. Joe Randolph Telecom Design Consultant Randolph Telecom, Inc. 781-721-2848 <skype:+17817212848?origin=IETB> (USA) [email protected] http://www.randolph-telecom.com <http://www.randolph-telecom.com/> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
