Hi all, We are in the process of building an OATS and we have a building/enclosure that is made of fiberglass. A link to the enclosure link can be seen below. My question is does the door opening to the dome need to be facing the antenna mast while tests are running so that there is no fiberglass between the DUT and the antenna. If we could we would like the door facing the control room so we can see the turntable. Any thoughts would be appreciated. Thanks, Cody http://www.mekco.com/open_area_test_site.htm
- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
