Colleagues - I have been encouraged to record in a final email what I have discovered with your help in my search for reliability data, so that future searches of the EMC-PSTC archive will turn up the references. The reliability/probability-of-failure figures are needed to allow calculations to confirm the SIL level of a safety critical system comprising both mechanical and electrical parts. Here are the Standards, with a couple of website links too:
Mechanical Reliability NSWC 98 Handbook of Reliability Prediction Procedures for Mechanical Equipment, latest issue and supporting MechRel software package are both available at no charge from the following web site: http://www.dt.navy.mil/tot-shi-sys/pro/rd-pro/mec/index.html NPRD-95 The Non-electronic Parts Reliability Data databook is published by the Reliability Analysis Center and provides historical field failure rate data on a wide variety of mechanical assemblies. This document has to be purchased. Electronic Reliability Mil-Hdbk-338 Electronic Reliability Design Handbook Mil-Hdbk-217 Reliability Prediction Of Electronic Equipment Mil-Hdbk-344A Environmental Stress Screening (ESS) of Electronic Equipment Down-loadable with no charge from: http://www.assistdocs.com/search/search_basic.cfm Telcordia SR-332 Handful of Websites http://www.enre.umd.edu/tools/mpp.htm http://www.isamex.org/C_Seguridad/articulosTec/maquinaria/accurate_FMEDA_mechanicalinstrument_techniques_TUV.pdf http://www.gmigasandflame.com/sil_info_levels.html http://www.iec.ch/zone/fsafety/concepts.htm http://www.relex.com/resources/prmodels.asp http://www.sae.org/ http://quanterion.com/ReliabilityQues/V1N1.htm I haven't asked everyone individually if I can credit them with the help they've provided so I'll not list names in full, but I do think their contributions should be recognised, so here's a big thank you to: Bill, Charlie, Chris, Dave, Macy, Neil, Paul, Robert and Ted Regards, Mark -- Mark Hone, HESS Manager Wellman Defence Limited Williams Road Portsmouth, Hampshire PO3 5FP, ENGLAND Tel: +44 (0)23 9266 4911 Tel: +44 (0)23 9262 9239 (Direct) Fax: +44 (0)23 9269 7864 Mobile: +44 (0)7919 047775 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc