Worldly Experts,
I am having a problem with a product meeting FCC Class A conducted limit at
13.56 MHz due to radiated signal from internal RFID unit coupling into AC
supply conductors.
The host product complies with Class A limits without RFID module
transmitting. RFID has FCC modular approval, but was compliance tested for
conducted emissions using a dummy load in place of the antenna. Is it
therefore acceptable to also test host product (for FCC Class A compliance)
with module transmitting into dummy loads instead of actual antenna?
A search of the FCC knowlege database did not turn up any clues.
adTHANKSvance
Bob Sykes
EMC Engineer
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to [email protected]
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas [email protected]
Mike Cantwell [email protected]
For policy questions, send mail to:
Jim Bacher: [email protected]
David Heald: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
