Dear Grace, You may use ANSI C63.4 or CISPR 16-1-2 for the calibration of LISNs. The parameters to be calibrated are Impedance, Phase, Isolation and Insertion loss.
Kind regards Mario Lehmann Geschäftsbereich European Compliance Laboratory (ECL) __________________________________________________ HERBERG. Service Plus GmbH Tel: +49 911 59835-923 Nordostpark 51 Fax: +49 911 59835-90 90411 Nürnberg mailto: [email protected] <mailto:[email protected]> http://www.ECL-Testhaus.de <http://www.ecl-testhaus.de/> Amtsgericht Nürnberg Geschäftsführer HRB 19587 Peter Birkmann <http://www.mesago.de/de/EMV/main.htm> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
