Kevin,
I would start here: http://www.emtest.com/products/product/102180100000010818.php Regards, Rob From: Harris, Kevin J (DSC) [mailto:[email protected]] Sent: Friday, August 13, 2010 11:06 AM To: [email protected] Subject: [PSES] ESD target Adaptor Dear Colleagues, I would like to verify the insertion loss of my ESD target-attenuator-cable chain. IEC 61000-4-2 identifies a conical adaptor to be used to interface the front of the ESD target to a coaxial cable in order to use a network analyser to make the measurement. Does anyone know of any manufacturers for this? Kind Regards Kevin - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
