Why would the signal source need calibration? Normally, it is the signal measurement devices that require calibration. Further, this signal source likely requires some amplification in order to provide the required signal for EMI testing, so that it is the amplified output which must be measured, not the signal generator itself. Ken Javor
Phone: (256) 650-5261 > From: Wendy Nya <[email protected]> > Date: Tue, 10 Aug 2010 01:23:29 -0700 (PDT) > To: <[email protected]> > Subject: Calibration supplier for signal generator with pulse modulation > > Dear All, > > I am looking for a calibration supplier that can provide accredited service > for > AR SG6000. It has built-in pulse modulation option (for Radiated Immunity > use). > > By the way - Is anyone using this model? It seems to be OEM from Agilent (it > came in an agilent box) but the equipment is marked AR > and works with Agilent N5181A driver. Agilent is saying that it is not able to > provide accredited calibration service for this model. > > Thanks & Regards, > Wendy Nya > > > > > - > ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. To post a message to the list, send your e-mail to > <[email protected]> > > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc > Graphics (in well-used formats), large files, etc. can be posted to that URL. > > Website: http://www.ieee-pses.org/ > Instructions: http://listserv.ieee.org/request/user-guide.html > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > Scott Douglas <[email protected]> > Mike Cantwell <[email protected]> > > For policy questions, send mail to: > Jim Bacher: <[email protected]> > David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
