Richard,
 
The additional testing period will start on May 1, 2011.
 
The full testing to IEC 62133 will start on May 1, 2012.
 
Please note, this applies to products falling outside the scope of TC 108
(60950-1/60065).  The decision for products within the scope of TC 108 has
been postponed until 2011.  This is partially due to the revised version of
IEC 62133 that not be available until 2012.
 

Best Regards,

 

Jody Leber

SGS Consumer Testing Services

Manager, Battery Test Certification Program


SGS - U. S. Testing Company, Inc.

16870 West Bernardo Drive, Suite 250
San Diego, CA 92127 USA

Phone: 678.469.9835
Fax:     858.592.7107
E-mail:  [email protected] <mailto:[email protected]> 

 

 

________________________________

From: Gartman, Richard [mailto:[email protected]] 
Sent: Wednesday, August 04, 2010 9:36 AM
To: [email protected]
Subject: [PSES] IEC 62133 question



I am looking for update on IEC 62133 standard for rechargeable batteries in
ICT equipment. I know the implementation was delayed from the original
schedule.

•         Until June 25, 2010, batteries can be tested to UL 1642 without
additional testing. 

•         After June 25, 2010 until June 26, 2011 batteries tested to UL
1642 will require additional testing on identified differences to ensure
compliance with IEC 62133 

•         After June 27, 2011 batteries must be certified to IEC 62133 

 

Any information would be helpful.

 

Regards

W. Richard Gartman, MS, CSP

Product Stewardship Manager

Texas Instruments, Education Technology

7800 Banner Drive, Dallas, Tx 75251

Office: 972-917-1636            Email: [email protected]
<mailto:[email protected]> 

Fax: 972-917-0668                 URL: www.education.ti.com
<http://www.education.ti.com/>  

  www.education.ti.com/us/productstewardship
<http://education.ti.com/us/productstewardship> 

   <http://education.ti.com/us/productstewardship> 

  <http://education.ti.com/us/productstewardship> > 

-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 

-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 

Information in this email and any attachments is confidential and intended
solely for the use of the individual(s) to whom it is addressed or otherwise
directed. Please note that any views or opinions presented in this email are
solely those of the author and do not necessarily represent those of the
Company. Finally, the recipient should check this email and any attachments
for the presence of viruses. The Company accepts no liability for any damage
caused by any virus transmitted by this email. All SGS services are rendered
in accordance with the applicable SGS conditions of service available on
request and accessible at http://www.sgs.com/terms_and_conditions.htm 
-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to