Hello All
I have been looking for the most relevant standard for a product which is used in commercial buildings to monitor and then control the airflow in air shifts. It monitors air speed down to minimal levels and then sends signals to adjust air speed and temperatures. EN61326 would be an obvious one, but I came across EN50428. It has a line in the operation and control section wrt to wind velocity. This is not a standard I am familiar with but it does only allow Class B emissions which is the problem I am having as the product will only meet Class A. Has anyone experience of testing air flow monitoring equipment. Searching the web, not many suppliers of this type of building control equipment seem to declare to it. Appreciate any feedback Julian Jones Hursley EMC Services Tel: 023 8027 1111 Mob: 07787 523 607 [email protected] <mailto:[email protected]> Unit 16, Brickfield Lane Chandlers Ford EASTLEIGH, Hampshire, SO53 4DP Company Registration 3301279 - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
