Hi Ian,
This question was posted on Interference Technology’s Shielding Forum, and received a reply. To view the reply, please visit the link below. http://www.interferencetechnology.com/f rums.html?tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[tid]=223 <http://www.interferencetechnology.com/ orums.html?tx_mmforum_pi1%5baction%5d=list_post&tx_mmforum_pi1%5btid%5d=223> Thanks, Kate Savo Forums Editor Interference Technology http://www.interferencetechnology.com/forums/ <http://www.interferencetechnology.com/forums/> 484-688-0300 ext 26 [email protected] <mailto:[email protected]> From: Ian White (UK) [mailto:[email protected]] Sent: Friday, February 26, 2010 4:24 AM To: [email protected] Subject: [PSES] Screened room move. We are due to move our EMC screened room within the next year to a new site. It is planned to be placed in a much larger building of steel and concrete construction. We have planned it to be placed close to an outside wall so we can pick up an outside earth which will be bonded in to the mass of the earth for safety reasons Could l hear your ideas on the best solution for earthing the screened room as l feel the present arrangement may be far from ideal. For example is it better to use a number of rod earth electrodes or some sort of steel mesh arrangement buried in the earth for a good RF performance. Thanks for your help. Regards Ian White (Project Engineer - Electronics) - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
