Hi Ian,
This question was posted on Interference Technology’s Shielding Forum, and received a reply. To view the reply, please visit the link below. http://www.interferencetechnology.com/f rums.html?tx_mmforum_pi1[action]=list_post&tx_mmforum_pi1[tid]=218 <http://www.interferencetechnology.com/ orums.html?tx_mmforum_pi1%5baction%5d=list_post&tx_mmforum_pi1%5btid%5d=218> Thanks, Kate Savo Forums Editor Interference Technology http://www.interferencetechnology.com/forums/ 484-688-0300 ext 26 [email protected] From: McBurney, Ian [Allen & Heath UK] [mailto:[email protected]] Sent: Friday, February 12, 2010 8:52 AM To: [email protected] Subject: [PSES] Shielding tents Dear colleagues. Does anyone have experience of using a Faraday/rfi screening tent for EMC emission measurements from products 1.5m x 1m x 0.5m? In particular; how effective are they in reducing external ambient emissions and are internal reflections from the EUT a problem. How do cables enter & exit the tent. I would appreciate some comments as I am considering purchasing one for pre-compliance 3m radiated emission measurements. Ian McBurney. Allen & Heath Ltd. email:[email protected] P Please consider the environment - do you really need to print this email? ***LEGAL DISCLAIMER*** This Email and any files transmitted with it are confidential and intended solely for the use of the individual to whom or the entity to which they are addressed. If you have received this email in error please notify the sender immediately. Please note that any views or opinions presented in this email are those of the author and do not necessarily represent those of Allen & Heath Limited. This email has been checked for the presence of viruses using Sophos AV Scanner. Anti-virus updates are downloaded on a daily basis . The recipient should also check this email and any attachments for the presence of viruses. Allen & Heath Limited accepts no liability for any damage caused by any virus transmitted via this email. This email has been sent from Allen & heath Limited, registered in England, reg. no:4163451. VAT Number GB 876 3336 94. Registered Address: Kernick Industrial Estate, Penryn, Cornwall. UK. TR10 9LU. *** - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
