Hi Ernest, This question was posted on Interference Technology's Shielding Forum, and received a few replies. To view the replies, please visit the link below.
http://www.interferencetechnology.com/technologies/shielding/forums.html ?tx_mmforum_pi1%5Baction%5D=list_post&tx_mmforum_pi1%5Btid%5D=195 Thanks, Kate Savo Forums Editor Interference Technology http://www.interferencetechnology.com/forums/ 484-688-0300 ext 26 [email protected] From: Ernest Rayman [mailto:[email protected]] Sent: Thursday, December 17, 2009 9:06 AM To: [email protected] Subject: [PSES] Conductive Paint We had en enclosure built and the sheet metal people powder coated every metal to metal contact surface. We have had a couple of systems misbehave in the field and it is an immunity issue. We have scraped all the powder coating off the metal to metal mating surfaces but we do not like the bare metal because it will eventually start to rust. I have looked into a couple of conductive paints that we can use but the lead engineer has expressed a distrust and dislike of conductive paints. I am looking for suggestions about what conductive paint you have used with success and if there are other options for rust control this late in the game. Thank you for all your help and Happy Holidays to everybody, Ernest Rayman _________________________________________________________________ Hotmail: Trusted email with powerful SPAM protection. http://clk.atdmt.com/GBL/go/177141665/direct/01/ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
