Mark,
 
HAR does not have to be marked on the cord. Here are the various HAR cord
types and the standards
 
http://www.eepca.org/products_har.shtml
 
If you do get a third party EU certification for your equipment, just like any
other component which needs to be approved, the certification body may require
the power cord to be certificated by an EU certification body such as IMQ,
VDE, etc. 
 
Best Regards,
 
Peter Merguerian
 

--- On Tue, 10/20/09, Mark Schmidt <[email protected]> wrote:



        From: Mark Schmidt <[email protected]>
        Subject: HAR Power Cord
        To: [email protected]
        Date: Tuesday, October 20, 2009, 7:05 AM
        
        

        Hello All,

         

        I am trying to qualify a detachable HAR power cord/cable. The cable is
imprinted with H05VV5-F and my research indicates that this cable type is
covered by the HAR Agreement. My clarity on this subject ends here. Is a
H05VV5-F (imprinted on the cable) cord equivalent to HAR? HAR is not marked on
the cable. This cable is manufactured to VDE0821.

        Any help is appreciated.

         

        Best Regards,

        Mark

         

         

         
        -
        ----------------------------------------------------------------
        This message is from the IEEE Product Safety Engineering Society 
emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>
        
        All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
        Graphics (in well-used formats), large files, etc. can be posted to 
that URL. 
        Website: http://www.ieee-pses.org/
        Instructions: http://listserv.ieee.org/request/user-guide.html
        List rules: http://www.ieee-pses.org/listrules.html 
        For help, send mail to the list administrators:
        Scott Douglas <[email protected]>
        Mike Cantwell <[email protected]> 
        For policy questions, send mail to:
        Jim Bacher <[email protected]>
        David Heald <[email protected]> 


-

This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<[email protected]>

All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL. 

Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:
Scott Douglas <[email protected]>
Mike Cantwell <[email protected]> 

For policy questions, send mail to:
Jim Bacher <[email protected]>
David Heald <[email protected]> 


Reply via email to